Jim Nyquist: At The Inflection Point Of IIoT

Jim Nyquist: At The Inflection Point Of IIoT

 Nov 04, 2017  Features  0

Jim Nyquist likes to use the phrase “inflection point” when he talks about the Industrial Internet of Things (IIoT). An inflection point is when the direction of a curve changes in response to an event, resulting in significant change. The industrial manufacturing sector is at an inflection point right now, and in his role as President of Systems and Solutions at Emerson Process Management, Nyquist is at the center of the inflection point.

Emerson Process Management has $2 billion in annual revenues and 10,000 employees. It’s headquartered just north of Austin in Round Rock and is part of Emerson. (NYSE: EMR) They design software (the brains) and manufacture hardware (the muscle) to run automation systems for refineries, platforms and manufacturing plants. Some of the industries they work in are oil & gas, pharmaceuticals, chemicals, refining, wastewater, power generation and food & beverage.

While manufacturing in the United States has lost five million jobs since 2000, in the last six years nearly 500,000 manufacturing jobs have been created, according to consulting firm Headlight Data. Those new manufacturing jobs are all in the industry sectors Emerson serves.

“We have gone through an inflection point in this business over the last several years,” said Nyquist. “We have introduced some new technology that has allowed us to completely change the way our customers execute capital projects as well as run their plants.”

Making Better Products By Listening To Customers

After he received $60 million from the Emerson board for a new campus a few years ago, Nyquist returned with his hand out once again. This time he wanted another $7 million to build an innovation center—a living lab for customers. The innovation center was built and today hosts over 150 current and potential client visits a year where technical information exchanges, or TIE meetings, take place.

Long-term customers like ExxonMobil and Shell send in about 20 people for three to four days every year to talk about their needs and what technology Emerson is developing. During one of the TIE meetings with Exxon, Emerson engineers conceived a new way to build a control subsystem.

“The way it used to be done was to wire everything and bring the wires in from the field sensors, put those on a bus bar or wiring pad, then crosswire those into the right part of the control system,” said Nyquist. Following the physical cross wiring, design changes brought rewiring and then more rewiring after final modifications in the field.

The Emerson Process Management engineers made a new control system for Exxon Mobile and in doing it, the new control subsystem changed the industry

“ExxonMobil took it and tried it and saved 30 to 40 percent of their installed costs by eliminating engineering hours, drawings, rework . . . and they told us they would never do a project the old way,” noted Nyquist. “The industry as a whole has taken this on, and it’s changed the way the industry does projects.”

Another TIE conversation brought about a significant advance in building out control systems via software technology.

“When we build a control system for a project, the first thing we’d do was build a small cabinet with a control system so we could start programming the exact application or operation,” said Nyquist.

Eventually, Emerson would construct the full system on a staging floor and build out the software for every stage of the system. Then, the client would send people to check and test the hardware and software, making sure when each valve opened, the right thing happened. It’s called a factory acceptance test, and it takes a lot of time.

“Now there’s new technology where we can take a control system and virtualize it into one work station, so we don’t have to physically build the control system at all,” said Nyquist. Instead of Emerson spending months building the test, it can be built in a day in software and sent to the client so they can check it on a terminal anywhere in the world.

There are two buildings on the Emerson campus—one for technology and the other for operations and engineering. Nyquist put the innovation center on the first floor, right in the middle, where everything comes together. When people walk by, “They see customers in here working with our people, talking about issues and creating solutions,” Nyquist said, “and we put glass on the front so it’s open and accessible, and you can see the innovation going on every day.”

Inside the innovation center, a classic marketing play goes on every week where listening and learning from clients leads to solving their biggest challenges.

The Components Of The Industrial Internet Of Things

From Nyquist’s perspective, there are three pieces to the Industrial Internet of Things.

“First are smart devices that can gather data and have something to say; second, you have all the connectivity that gets all that data securely somewhere, and third is the whole software and analytic infrastructure,” he said.

Jim Nyquist: At The Inflection Point Of IIoT

 Nov 04, 2017  Features  0

  •  
  •  
  •  

Jim Nyquist likes to use the phrase “inflection point” when he talks about the Industrial Internet of Things (IIoT). An inflection point is when the direction of a curve changes in response to an event, resulting in significant change. The industrial manufacturing sector is at an inflection point right now, and in his role as President of Systems and Solutions at Emerson Process Management, Nyquist is at the center of the inflection point.

Emerson Process Management has $2 billion in annual revenues and 10,000 employees. It’s headquartered just north of Austin in Round Rock and is part of Emerson. (NYSE: EMR) They design software (the brains) and manufacture hardware (the muscle) to run automation systems for refineries, platforms and manufacturing plants. Some of the industries they work in are oil & gas, pharmaceuticals, chemicals, refining, wastewater, power generation and food & beverage.

While manufacturing in the United States has lost five million jobs since 2000, in the last six years nearly 500,000 manufacturing jobs have been created, according to consulting firm Headlight Data. Those new manufacturing jobs are all in the industry sectors Emerson serves.

“We have gone through an inflection point in this business over the last several years,” said Nyquist. “We have introduced some new technology that has allowed us to completely change the way our customers execute capital projects as well as run their plants.”

Making Better Products By Listening To Customers

After he received $60 million from the Emerson board for a new campus a few years ago, Nyquist returned with his hand out once again. This time he wanted another $7 million to build an innovation center—a living lab for customers. The innovation center was built and today hosts over 150 current and potential client visits a year where technical information exchanges, or TIE meetings, take place.

Long-term customers like ExxonMobil and Shell send in about 20 people for three to four days every year to talk about their needs and what technology Emerson is developing. During one of the TIE meetings with Exxon, Emerson engineers conceived a new way to build a control subsystem.

“The way it used to be done was to wire everything and bring the wires in from the field sensors, put those on a bus bar or wiring pad, then crosswire those into the right part of the control system,” said Nyquist. Following the physical cross wiring, design changes brought rewiring and then more rewiring after final modifications in the field.

The Emerson Process Management engineers made a new control system for Exxon Mobile and in doing it, the new control subsystem changed the industry

“ExxonMobil took it and tried it and saved 30 to 40 percent of their installed costs by eliminating engineering hours, drawings, rework . . . and they told us they would never do a project the old way,” noted Nyquist. “The industry as a whole has taken this on, and it’s changed the way the industry does projects.”

Another TIE conversation brought about a significant advance in building out control systems via software technology.

“When we build a control system for a project, the first thing we’d do was build a small cabinet with a control system so we could start programming the exact application or operation,” said Nyquist.

Eventually, Emerson would construct the full system on a staging floor and build out the software for every stage of the system. Then, the client would send people to check and test the hardware and software, making sure when each valve opened, the right thing happened. It’s called a factory acceptance test, and it takes a lot of time.

“Now there’s new technology where we can take a control system and virtualize it into one work station, so we don’t have to physically build the control system at all,” said Nyquist. Instead of Emerson spending months building the test, it can be built in a day in software and sent to the client so they can check it on a terminal anywhere in the world.

There are two buildings on the Emerson campus—one for technology and the other for operations and engineering. Nyquist put the innovation center on the first floor, right in the middle, where everything comes together. When people walk by, “They see customers in here working with our people, talking about issues and creating solutions,” Nyquist said, “and we put glass on the front so it’s open and accessible, and you can see the innovation going on every day.”

Inside the innovation center, a classic marketing play goes on every week where listening and learning from clients leads to solving their biggest challenges.

The Components Of The Industrial Internet Of Things

From Nyquist’s perspective, there are three pieces to the Industrial Internet of Things.

“First are smart devices that can gather data and have something to say; second, you have all the connectivity that gets all that data securely somewhere, and third is the whole software and analytic infrastructure,” he said.

 

A skid has been constructed inside the innovation center showing visitors the sensors (in blue) that are measuring levels, ow, pressure, temperature, and the composition of what’s in the ow stream. It’s also measuring corrosion and vibration. The sensors are all smart microprocessors delivering information on up to 60 things. Sensors can be wired or wireless and it all talks back to the control room.
The control room gathers all the data, processes the data points via algorithms, and sends a signal back to the valves (in green). It’s all guided by software made by Emerson in Round Rock.

As an example of how their systems work inside a refinery or platform, data is being gathered by scanning thousands of pieces of equipment every second. Inside a manufacturing plant there may be 50 measurement devices—and inside a refinery, anywhere from 20,000 to 30,000 measurement devices. When a vibration is picked up, the problem could be a bearing, lubricant or alignment malfunction. Because things fail in a predictable way, the smart devices tell operations what’s going wrong. The analytics will tell the operator what the outcome turned out to be the last time the vibration in this type of equipment occurred. This predictive diagnostic can avert equipment failure and get a fix before the equipment goes down.

By moving to the next level and using cloud computing, along with more data and higher computing power, companies can look at how an entire plant is operating at any given moment. And, of course, there’s an app for that. Emerson recently released DeltaV Mobile—it provides all the alarms, trends and data and sends it to smart phones.

All That Buzz

Read more here